Rubber Anti Vibration Mounts with Steel-Reinforced Base Flange
Acrefine AVI-R rubber anti vibration mounts stop a machine passing its vibration into the floor, wall bracket or roof it stands on. Without them, the hum of a compressor, pump or fan travels through the structure and can be heard in other rooms or by the neighbours. Each mount is a rubber cone on a rubber base flange with a steel plate moulded inside it, and a threaded insert at its centre: the machine bolts into the insert from above, and the rubber compresses under the load and absorbs vibration before it reaches the building. Typical uses are air conditioner and heat pump outdoor units on wall brackets or on the ground, pumps, compressors and fans; the larger AVI-RM also suits small packaged generators.
⚠️ IMPORTANT: CHOOSE BY KG, NOT BY THE MODEL CODE
The number in the model code is the hardness of the rubber (Shore A), not its weight rating: AVI-RS-40 carries 25 kg, while AVI-RM-40 carries 40 kg. Use one type under a machine and do not mix AVI-RS with AVI-RM, as their heights differ. Mixing ratings of the same type is fine: where the weight is uneven, choose each mount for the load at its own corner.
Construction and Dimensions
-
AVI-RS: 36 mm (1.42") high, 90 × 45 mm base, M8 threaded insert, two 9 mm slots at 64 mm centres.
-
AVI-RM: 48 mm (1.89") high, 115 × 55 mm base, M10 threaded insert, two 11 mm slots at 80 mm centres.
-
Base flange: a steel plate moulded inside the rubber keeps the flange firm at the slots, where plain rubber mounts can tear. One slot runs lengthways and one across, so the position can be adjusted.
-
Colour mark: none for 40 Shore A, blue for 50 Shore A, yellow for 60 Shore A.
Load Table
| Model |
Colour mark |
Recommended load |
Max. load |
| AVI-RS-40 |
none |
25 kg (55 lb) |
30 kg (66 lb) |
| AVI-RS-50 |
blue |
32 kg (71 lb) |
38 kg (84 lb) |
| AVI-RS-60 |
yellow |
42 kg (93 lb) |
50 kg (110 lb) |
| AVI-RM-40 |
none |
40 kg (88 lb) |
48 kg (106 lb) |
| AVI-RM-50 |
blue |
50 kg (110 lb) |
60 kg (132 lb) |
| AVI-RM-60 |
yellow |
66 kg (146 lb) |
80 kg (176 lb) |
Values are per mount. Max. load is a static limit: select by the recommended load for isolation and service life. At the recommended load AVI-RS compresses 4.3 mm (0.17") and AVI-RM 6.7 mm (0.26"); at the max. load, 6.0 mm (0.24") and 8.0 mm (0.31"). These are short-term deflections; allow for about 20% creep under sustained load. Compression properties independently tested to ASTM D353, 2016.
How to Choose and Install
-
How to choose: divide the weight of the machine by the number of mounts, usually four, and pick the mount whose recommended load covers that share. A 110 kg outdoor unit on four mounts puts 27.5 kg on each, so AVI-RS-50 (32 kg).
-
Uneven weight: where a compressor sits at one end of an outdoor unit, for example, choose each mount for the load at its own corner. At their recommended loads all three ratings of a type compress the same, so the machine stays level.
-
Installation: bolt each foot of the machine into the threaded insert from above, then fix the base flange to the floor or bracket through its two slots. Bolts are not included.
-
Natural frequency: at the recommended load about 7.6 Hz for AVI-RS and 6.1 Hz for AVI-RM (estimated from static deflection, per industry practice). A lower natural frequency isolates lower-speed machines.
About Acrefine
Acrefine Engineering designs vibration isolation and seismic restraint products for building services and industry. Fixing Smith is Acrefine's official online supplier and ships from UK stock. Acrefine mounts come with a 2-year manufacturer warranty against manufacturing defects.